PackTonne
FIG. DT · Skirt Top, Tied Closed

Duffle Top Bulk Bags

A duffle top bulk bag is a woven polypropylene FIBC with an extended fabric skirt around the fill opening, gathered and tied closed after filling. It needs no filling hardware, so it suits manual, chute and simple loader lines, and the skirt leaves room to tie a liner separately. The trade-off is dust: a wide opening lets more escape than a spout top, so it fits products that are not very fine or dust-sensitive.

  • SWL 500–2,000 kg
  • Skirt top, tied closed
  • Safety factor 5:1 / 6:1
Duffle Top Bulk Bags — FIBC bulk bag
Why This Bag

Why Choose Duffle Top Bulk Bags

01

No filling hardware needed

The skirt is a wide opening you fill by hand, chute or loader. There is no sleeve to align with a nozzle and no sealing equipment to buy.

02

Simple to close

After filling, the skirt is gathered into a neck and tied. It is slower than a clip on a high-speed line but needs nothing beyond the tie.

03

Room to tie a liner separately

With a liner fitted, the skirt lets the liner be extended and tied inside the opening, so it has its own closure apart from the outer fabric.

04

Same fabric and rating as a standard bag

Only the top changes. Fabric weight, loops and safety factor are specified the same way as for any woven polypropylene FIBC.

Material

Why a Skirt Top

A duffle top is the simplest way to close a bulk bag after filling. The extra fabric gathers into a neck that is tied by hand, with no sleeve, nozzle or sealing equipment involved.

Simple to fill
A wide opening takes a shovel, bucket, chute or loader without aligning to a narrow spout.
Simple to close
One tie closes the bag, and the closure can be checked by eye.
Liner-friendly
The skirt gives operators room to extend and tie a liner inside the opening.
Same woven polypropylene
The fabric, loops and seams are the same as in a standard FIBC, and mono-material polypropylene can be requested.
Open duffle top of a white woven bulk bag with the fabric skirt and lifting loops
An open duffle top: the fabric skirt around the opening is what gets gathered and tied after filling.
Features

Key Features

Fabric skirt top

Sized to your chute or loader, long enough to gather into a neck and tie.

Four cross-corner loops

Standard lifting by forklift or hoist. Two-loop and single-loop builds are available.

Double-stitched box seams

Seams and loop stitching are specified to the same safety factor as the fabric.

Flat or spout bottom

Choose the bottom to suit how the bag is emptied: cut or lifted, or released through a spout.

Optional PE liner

Loose or form-fit liner for products that must stay dry or would sift through the weave.

Custom printing

1–3 colors on 1–4 panels for branding, product data and handling instructions.

Specifications

Spec Sheet

Top styleDuffle top: fabric skirt, gathered and tied closed
Safe working load500–2,000 kg
Safety factor5:1 single-trip / 6:1 multi-trip (ISO 21898:2024)
Standard dimensions90 × 90 × 110 cm body (custom sizes available)
Bottom optionsFlat bottom or spout bottom
Loop options4 cross-corner (standard), 2-loop, single loop
LinerOptional PE liner, loose or form-fit
Static protectionStandard Type A: none. Ask about Type B, C or D builds
How It's Made

Construction

A duffle top bulk bag is built like a standard woven polypropylene FIBC, with one addition: an extra length of fabric sewn around the top of the body to form the skirt. Panels are cut to your dimensions and joined with box seams, and the loops are stitched to the safety factor you order. The skirt is sized to your filling process, wide enough to take a chute or loader and long enough to gather into a neck that can be tied. FIBCA guidance is to extend a liner past the duffle and tie it off within it, so a lined bag gets a skirt long enough to do that.

Not for: A duffle top is a poor fit for very fine or dust-sensitive powders, and for automated lines with a filling nozzle: the open skirt lets dust escape during filling. Choose a spout top for those. For flammable powders, ask about anti-static types.

Polypropylene tape being extruded before weaving into FIBC fabric
1 · Extrusion — resin drawn into flat tape
Circular loom weaving polypropylene tape into tubular FIBC fabric
2 · Weaving — tape woven into fabric
Worker sewing FIBC bulk bag loops on an industrial sewing machine
3 · Sewing — panels, seams and loops joined
Compare This Type

Duffle Top vs Spout Top vs Open Top: Which Top Fits Your Line?

 Duffle topSpout topOpen top
OpeningWide fabric skirtNarrower fabric sleeveWide opening, no skirt
ClosureGathered and tied by handCable tie, clip or heat sealNone built in; often covered with a separate lid
Filling equipmentNone neededNozzle sized to the spoutNone needed
Dust during fillingMore escapesLess escapesMost escapes
Liner handlingRoom to tie the liner separatelyLiner tied or sealed in the sleeveLiner closed separately
Choose it whenManual, chute or simple loader fillingAutomated or dusty filling linesFast manual filling, low dust sensitivity
Customization

What You Can Change

  • Capacity from 500 kg to 2,000 kg
  • Skirt size and length set to your filling chute or loader
  • 4 cross-corner, 2-loop or single loop configurations
  • Flat bottom or spout bottom to match your discharge line
  • Optional PE liner, loose or form-fit
  • 1–3 color printing on 1–4 panels
Applications

Where Duffle Top Bulk Bags Are Used

Sand, gravel and aggregates

Free-flowing and dense. Filled by chute or loader, so the wide skirt is an advantage; size the bag to its weight rating.

How full a bag of sand gets

Fertilizer granules

Granules fill cleanly through a skirt. Add a liner tied inside the duffle to control moisture and caking.

Bulk bags for fertilizer

Minerals and ores

Coarse material fills without dust concerns. Abrasion drives fabric weight more than the top style does.

Bulk bags for mining

Grain and agricultural products

Whole grain in non-hazardous handling areas. Fine grain dust may need a different top or a static-protective type.

Bulk bags for grain

Moisture-sensitive granules

A liner extended into the skirt and tied inside it gives the product its own seal.

PE liner types
Not on this list?Send us the product and its bulk density — we will confirm whether Duffle Top Bulk Bags fit or another type is safer.Ask about your product
Solutions

Problems a Correctly Specified Bag Solves

ProblemDust escaping while the bag is filled

FixUse a spout top with a nozzle that matches it. Keep the duffle top for products that are not very fine or dust-sensitive.

Duffle, spout or open top

ProblemA closure that works loose in transit

FixTie the skirt as the manufacturer specifies and choose the closure method for the journey, not only for filling speed.

Bulk bag closures

ProblemA liner that opens or leaks at the neck

FixExtend the liner into the skirt and tie it off separately from the outer fabric.

PE liner types

ProblemA skirt that does not suit the chute or loader

FixSize the skirt from the outlet of your filling equipment and tell us how the bag will be closed.

What a filler needs from the bag
Options
Open duffle top of a white woven bulk bag with the fabric skirt and lifting loops
Duffle top — the open fabric skirt that is tied after filling
Three schematic steps: skirt open, filling, skirt gathered and tied
Schematic — how a duffle top is filled and closed
Comparison of duffle top and spout top across opening, closure, equipment, dust and best fit
Schematic — duffle top compared with spout top
Worker fitting a clear PE liner inside a woven polypropylene bulk bag
PE liner — fitted inside the bag for moisture and sifting protection
Filled bulk bag lifted on a forklift with its bottom discharge spout tied shut
Spout bottom — a common pairing for emptying into a hopper
How We Work

How We Spec Your Bag

  1. 01

    Tell us the product

    Material, bulk density, target fill weight, and how the bag is filled and emptied.

  2. 02

    We match the spec

    Static class, fabric weight, safety factor, loops, top and bottom, liner and printing.

  3. 03

    Sample and approve

    A pre-production sample for your own fill test. Production starts only on your written approval.

  4. 04

    Production and QC

    Batch-tagged production and load-test reports. Third-party inspection is welcome before shipment.

  5. 05

    Loading and documents

    Loading plan, photos at loading and the full export document set.

Quality control technician performing a pull test on FIBC bulk bag lifting loops
Quality Control

Checked Before It Ships

  • Incoming fabric checked for weight and tensile strength before cutting
  • Load testing on new specifications, to the safety factor on the label
  • Every bag tagged with batch number and production date for traceability
  • Pre-shipment inspection by a third party or your own inspector on request
How we vet production
Standards & Testing

What This Bag Is Tested To

  • ISO 21898:2024 — cyclic top lift test (30 cycles @ 2× SWL, final cycle @ 5× SWL)
  • FIBCA Safe Handling Guidelines v2.0 — the fill spout or duffle must be closed according to the FIBC manufacturer’s instructions
  • GB/T 10454-2025 — effective March 2026, dimensional tolerance and single-trip/multi-trip classification
Buyer's Note

From Our Sourcing Desk

Specify the skirt, not just the top style. Give the supplier the size of your chute or loader outlet and say how the bag will be closed, because a skirt that is too narrow is slow to fill and one that is too long is awkward to tie. If the bag has a liner, ask how it is extended into the skirt and tied, since FIBCA guidance is to tie the liner off within the duffle. For dusty products, price a spout top alongside before you decide.

FAQ

Common Questions

What is a duffle top bulk bag?

A duffle top bulk bag is a woven polypropylene FIBC with an extended fabric skirt around the fill opening. After filling, the skirt is gathered and tied closed by hand. It needs no special filling hardware, which makes it a common choice for manual and simple loader lines.

How do you close a duffle top bulk bag?

Gather the skirt into a neck and tie it closed, following the bag manufacturer’s instructions. FIBCA guidance is that the fill spout or duffle must be closed as the manufacturer specifies. If the bag has a liner, tie the liner off inside the skirt first, then close the outer fabric.

What is the difference between a duffle top and a spout top?

A duffle top has a wide skirt that is tied by hand and needs no filling hardware, but it lets more dust escape. A spout top has a narrower sleeve that fits a filling nozzle and is closed with a tie, clip or seal, which suits automated or dusty lines. Choose by the equipment at your filling end.

Can a duffle top bag have a liner?

Yes. A PE liner can be fitted loose or form-fit. The skirt gives room to extend the liner past the opening and tie it off separately from the outer fabric, so the product stays protected even if the outer tie loosens in transit. Tell us if the product is moisture-sensitive.

Are duffle top bags dusty to fill?

More than spout top bags, because the skirt is a wide opening. For coarse, free-flowing products this is usually fine. For fine powders or dust-sensitive sites, a spout top with a matching nozzle controls dust better. If you are unsure, send the product details and we will suggest the top style.

Can I get a duffle top bag with a spout bottom?

Yes. A duffle top filled by hand or chute with a spout bottom for emptying into a hopper is a common pairing. Top and bottom are separate choices, so each should match the equipment at its own end of your process.

What should I tell you to quote a duffle top bag?

Send the product and its bulk density, the target fill weight, the outlet size of your chute or loader, how you plan to close the bag, whether it needs a liner, and the bottom style. We will confirm dimensions, fabric weight and safety factor against that, including the minimum order.

Get a Factory Quote for Duffle Top Bulk Bags in 24 Hours

Request a Quote